Exit lock case with automatic deadlocking latchbolt for wooden doors with one blade. The door is opened from outside with a door pull. The lock case fulfils the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209. The lock is always opened from the inside by a lever handle, push pad or panic bar. Deadlocking is controlled by a snib in the front plate. Using of the snib is normally blocked. The snib is released by turning the key. Snib position: UP = Deadlocking, latchbolt protrudes 17 mm The lock can be opened from outside by key only and from inside by a lever handle, push pad or panic bar. DOWN = Latchbolt is retained inside the lock case. LE185X is the microswitch version of the lock. The switch changes the status when latchbolt is protruded from 14 mm to 17 mm. Following striker plates are recommended to be used with microswitch version: 4692, 4693. Striker plate: LP711, LP714, LP721, LP731 Cylinder: ABLOY. C, N, T, U Mortise standard: OneFit mortise